Techno Press
Tp_Editing System.E (TES.E)
Login Search
Techno-Press Journals



Home

Editors-in-Chief
    Prof. Jin Keun Kim
    Department of Civil Envir. Eng.
    Korea Advanced Inst. of Sci & Tech.
    Daejeon 34141, Korea

    Prof. Erik Schlangen
    CEG, Microlab
    Delft Univ. of Tech.
    Stevinweg 1
    Delft, 2628 CN, Netherlands

Associate Editor
    Prof. Jae Hong Kim
    Dept. of Civil Envir. Eng.
    Korea Adv. Inst. of Sci. & Technol.
    Daejeon 34141, Korea

    Prof. Myoung Sung Choi
    Dept. of Civil Envir. Eng.
    DanKook University
     Yongin 16890, Korea

Managing Editor
    Prof. Chang-Koon Choi
    Korea Adv. Inst. of Sci. & Technol.
    Daejeon 34141, Korea


 ESCI
 SCOPUS
 SCIE (Impact factor: 2.6)
ISSN:2287-5301(Print) ISSN:2287-531X(Online)
Vol.17/18 (12 issues) for 2024
Fully Open Access journal: there is a mandatory Open Access Fee of USD 595.
For correspondence: acc@techno-press.com
Aims and Scope

The Advances in Concrete Construction (ACC), An International Journal, aims at highlighting research, development and innovation in Concrete Construction, focusing all relevant fields, such as:

- Innovative on site and precast methods for new structures,
- Maintenance, repair and strengthening of existing structures,
- Enhanced robustness and seismic performance,
- Numerical modeling and risk analysis,
- Durability and structural health monitoring, and
- Eco-efficient and ultra-high performance cementitious materials

Editorial Board

 
Dr. Deepankar Ashish
Cardiff Univ.
Cardiff, CF24 3AA, UK


Dr. A.F. Ashour
Design Tech. Univ. of Bradford
West Yorkshire BD7 1DP, UK


Prof. Miguel Azenha
Univ. of Minho
4800-058 Guimaraes, Portugal


Prof. Efstratios Badogiannis
National Technical Univ. Of Athens
Patission Complex 42, Patission str 10682 Athens, Greece


Dr. Yu Bai
Monash University
Clayton, VIC 3800, Australia


Prof. Sudhirkumar Barai
Indian Institute of Tech.
Kharagpur 721032, India


Prof. Jorge de Brito
Technical Univ. of Lisbon
1049-001 Lisbon, Portugal


Prof. Julian Carrillo
Univ. Militar Nueva Granada
Av Calle 100, Bogotá, Colombia


Prof. Baochun Chen
Fuzhou Univ.
350108 Fuzhou, China


Prof. Myoungsung Choi
Dankook Univ.
Yongin, 16890, South Korea

Prof. Chung-Che Chou
National Taiwan Univ.
Taipei 10617, Taiwan


Prof. David Cleland
Queen's Univ. Belfast
Belfast BT9 5AG, Ireland


Dr. J. Ivan Escalante-Garcia
Cinvestav-Saltillo
Coahuila de Zaragoza, Mexico


Prof. Raoul François
Inst. Nat'l Sci. Appliquées
Toulouse, France


Prof. Elisa Franzoni
Univ. di Bologna
3340126 Bologna, Italy


Prof. Miguel Ferreira
VTT-Tech. Research Centre of Finland
FI-02044 VVT, Finland


Dr. Amir Hossein Gandomi
Univ. of Technology Sydney
Ultimo, NSW 2007, Australia


Prof. Zhi Ge
Shandong Univ.
Shandong 250061, China


Prof. Erhan Güneyisi
Gaziantep Univ.
27310, Gaziantep, Turkey


Prof. Baoguo Han
Harbin Ins. of Tech.
150001 Harbin, China


Prof. Rami A. Hawileh
American Univ. of Sharjah
Sharjah, UAE


Prof. Raja Rizwan Hussain
King Saud Univ.
Riyadh, 11421, Saudi Arabia


Prof. Mitsunori Kawamura
Kanazawa Univ.
Kanazawa, Ishikawa 920-0942, Japan


Prof. Said Kenai
Univ. of Blida
Blida, Algeria
Prof. Amar Khennane
Univ. of New South Wales
Canberra, BC 2610, Australia


Prof. Moacir Kripka
Universidade de Passo Fundo
Campus I - BR 285, Bairro Sao Jose, Brazil


Prof. Yong Lu
Univ. of Edinburgh
Edinburgh EH9 3JL, UK


Prof. Tamer Abdallah Maaddawy
UAE Univ.
Abu Dhabi, UAE


Prof. Pier Giorgio Malerba
Politecnico di Milano
32-20133 Milan, Italy


Prof. Gonzalo Martinez-Barrera
Autonomous Univ.
Toluca, Mexico


Prof. Domagoj Matesan
Univ. of Split
Split 21000, Croatia


Prof. Mohamed Seddik Meddah
Kingston Univ.
London KT1 2EE, UK


Prof. Euripidis Mistakidis
Univ. of Thessaly
38334 Volos, Greece


Dr. A. Ramachandra Murthy
CSIR - Str. Eng. Research Centre
Chennai - 600113, India


Dr. Meysam Najimi
Univ. of Nevada-Las Vegas
Las Vegas, NV 89154-4015, USA


Dr. Luca Nardini
Univ. of Pisa
56126 Pisa, Italy


Dr. Tran Cao Thanh Ngoc
Vietnam Nat'l Univ.
H Chí Minh, Vietnam


Prof. Vagelis G. Papadakis
Univ. of Patras
30100 Agrinio, Greece


Prof. Gai-Fei Peng
Beijing Jiaotong Univ.
Beijing100044, China


Prof. Victor Yepes Piqueras
Univ. Politecnica de Valencia
s/n 46022 Valencia, Spain


Prof. Julio Pituba
Univ. Federal de Goias
Cidade de Goiás - GO, Brazil


Prof. Hamid Reza Ronagh
Univ. of Queensland
Brisbane, QLD 4027, Australia


Prof. Mohamed Abd El Aziz Safan
Menoufia Univ.
Menouf, Egypt


Prof. Messaoud Saidani
Coventry Univ.
Coventry CV1 5FB, UK


Dr. Velu Saraswathy
Central Electrochemical Res Ins
Karaikudi-630006, Tamilnadu, India


Prof. Baris Sevim
Yildiz Tech. Univ.
34220 Istanbul, Turekey


Prof. Halil Sezen
Ohio State Univ.
Columbus, OH 43210-1173, USA


Dr. Abid Ali Shah
Univ. of Siegen
57072 Siegen, Germany


Dr. Faiz Uddin Ahmed Shaikh
Curtin Univ.
Perth, WA 6845, Australia


Prof. Konstantinos V. Spiliopoulos
National Tech. Univ. Athens
Zografou 157-80, Greece


Dr. Kai-Seung Ray Su
Univ. of Hong Kong
Pokfulam, Hong Kong


Prof. Piti Sukontasukkul
King Mongkut's Univ. of Tech. N. Bangkok
Bangkok 10800, Thailand


Dr. K. Thangavel
Central Electrochemical Res. Ins.
Karaikudi 630 006, India


Prof. Catherina Thiele
Tech. Univ. Kaiserslautern
67653 Kaiserslautern,Germany


Prof. Gregor Trtnik
IGMAT Building Materials Ins.
1000 Ljubljana, Slovenia


Dr. Chih-Ta Tsai
National Cheng Kung Univ.
70101 Tainan, Taipei, Taiwan


Prof. Xuan Hong Vu
Univ. of Lyon1
69622 Villeurbanne cedex, France


Prof. Xiao-Hui Wang
Shangai Jiao Tong Univ.
Shanghai 200240, China


Prof. Xiang Guo Wu
Harbin Institute of Technology
Heilongjiang Province 150001, China


Prof. Feng Xing
Shenzhen Univ.
Shenzhen, 518060, China


Prof. Chung-Chia Yang
National Taiwan Ocean Univ.
Keelung 20224, Taiwan


Dr. Nur Yazdani
Univ. of Texas at Arlington
Arlington, TX 76019, USA


Dr. Binsheng Zhang
Glasgow Caledonian Univ.
Glasgow G4 0BA, Scotland, UK


Dr. Xiangming Zhou
Brunel Univ.
Middlesex UB8 3PH, UK

Guide to Authors (Last updated: Oct 25, 2023)

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[acc@techno-press.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Open Access
There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.


Table of Contents.
       
 
  • 2024  Volume 18      No. 1      No.2    No.3
     
  • 2024  Volume 17      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2023  Volume 16      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2023  Volume 15      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2022  Volume 14      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2022  Volume 13      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2021  Volume 12      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2021  Volume 11      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2020  Volume 10      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2020  Volume 9      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2019  Volume 8      No. 1      No.2    No.3    No.4
     
  • 2019  Volume 7      No. 1      No.2    No.3    No.4
     
  • 2018  Volume 6      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2017  Volume 5      No. 1      No.2    No.3    No.4    No.5    No.6
     
  • 2016  Volume 4      No. 1      No.2    No.3    No.4    No.4
     
  • 2015  Volume 3      No. 1      No.2    No.3    No.4
     
  • 2014  Volume 2      No. 1      No.2    No.3    No.4
     
  • 2013  Volume 1      No. 1      No.2    No.3    No.4
           

    Subscription

    2021 Subscription Rates


    USD

    Advances in Concrete Construction
    Volume 11/12 (12 issues)

    Print +e Online +c

    Airmail*

    Institutional Subscription

    863

    705

    +75


    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. Personal Subscription Rates : Please inquire at subs@techno-press.com.





    Research and Publication Ethics

    All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines: https://publicationethics.org/guidance/Guidelines.

    1. Authorship
    Authorship credit should be based on
        (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
       or interpretation of data for the work,
        (2) Drafting the work or revising it critically for important intellectual content,
        (3) Final approval of the version to be published, and
        (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
       to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
    Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

    2. Originality, plagiarism and duplicate publication
    Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the papers arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

    3. Conflict of interest statement
    The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

    4. Process for managing research and publication misconduct
    When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an authors idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE, https://publicationethics.org/guidance/Flowcharts.
    The discussion and decision on the suspected cases are carried out by the Editorial Board.

    5. Editorial responsibilities
    The Editorial Board will continuously work to monitor and safeguard publication ethics:
    * Guidelines for retracting articles;
    * Maintenance of the integrity of academic records;
    * Preclusion of business needs from compromising intellectual and ethical standards;
    * Publishing corrections, clarifications, retractions, and apologies when needed; and
    * Excluding plagiarized and fraudulent data.
    The editors maintain the following responsibilities:
    * Responsibility and authority to reject and accept articles;
    * Avoid any conflict of interest with respect to articles they reject or accept;
    * Promote the publication of corrections or retractions when errors are found; and
    * Preserve the anonymity of reviewers.


    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2024 Techno-Press ALL RIGHTS RESERVED.
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Email: admin@techno-press.com