Techno Press



Home


Editors-in-Chief
    Prof. Jin Keun Kim
    Department of Civil & Environmental Eng.
    KAIST
    Daejeon 305-701, Korea

    Prof. Paulo Monterio
    Department of Civil & Environmental Eng.
    University of California, Berkeley
    Berkeley CA 94720, USA

Managing Editor
    Prof. Chang-Koon Choi
    Korea Advanced Inst. of Sci. & Tech.
    Daejeon 305-701, Korea

ISSN:2287-5301(Print) ISSN:2287-531X(Online)

Vol. 2(4 issues) for 2014, Quarterly
Aims and Scope
The Advances in Concrete Construction (ACC), An International Journal, aims at highlighting research, development and innovation in Concrete Construction, focusing all relevant fields, such as:

- Innovative on site and precast methods for new structures,
- Maintenance, repair and strengthening of existing structures,
- Enhanced robustness and seismic performance,
- Numerical modeling and risk analysis,
- Durability and structural health monitoring, and
- Eco-efficient and ultra-high performance cementitious materials
Editorial Board
Dr. A.F. Ashour
Design Tech. Univ. of Bradford
West Yorkshire BD7 1DP, UK

Prof. Miguel Azenha
Univ. of Minho
4800-058 Guimaraes, Portugal

Dr. Yu Bai
Monash University
Clayton, VIC 3800, Australia

Prof. Sudhirkumar Barai
Indian Institute of Tech.
Kharagpur 721032, India

Prof. Jorge de Brito
Technical University of Lisbon
1049-001 Lisbon, Portugal

Prof. Julian Carrillo
University Militar Nueva Granada
Av Calle 100, Bogotá, Colombia

Prof. Baochun Chen
Fuzhou University
350108 Fuzhou, China

Prof. Chung-Che Chou
National Taiwan University
Taipei 10617, Taiwan

Prof. David Cleland
Queen's University Belfast
Belfast BT9 5AG, Ireland

Dr. J. Ivan Escalante-Garcia
Cinvestav-Saltillo
Coahuila de Zaragoza, Mexico

Prof. Jürgen Feix
University of Innsbruck
A-6020 Innsbruck, Austria

Prof. Miguel Ferreira
VTT-Tech. Research Centre of Finland
FI-02044 VVT, Finland

Prof. Raoul François
Inst. Nat'l Sci. Appliquées
Toulouse, France

Prof. Elisa Franzoni
University di Bologna
3340126 Bologna, Italy

Dr. Amir Hossein Gandomi
University of Akron
Akron, OH 44325, USA

Prof. Zhi Ge
Shandong University
Shandong 250061, China

Prof. Odd Gjørv
Norwegian Univ. Sci. & Tech.
Trondheim, Norway

Prof. Erhan Güneyisi
Gaziantep University
27310, Gaziantep, Turkey

Prof. Baoguo Han
Harbin Ins. of Tech.
150001 Harbin, China

Prof. Raja Rizwan Hussain
King Saud University
Riyadh, 11421, Saudi Arabia

Prof. Rami A. Hawileh
American University of Sharjah
Sharjah, UAE

Prof. Tan Kiang Hwee
National University of Singapore
Singapore 119615, Singapore

Prof. Said Kenai
University of Blida
Blida, Algeria

Prof. Amar Khennane
University of New South Wales
Canberra, BC 2610, Australia

Prof. Mitsunori Kawamura
Kanazawa University
Kanazawa, Ishikawa 920-0942, Japan

Prof. Yong Lu
University of Edinburgh
Edinburgh EH9 3JL, UK

Prof. Tamer Abdallah Maaddawy
UAE University
Abu Dhabi, UAE

Prof. Pier Giorgio Malerba
Politecnico di Milano
32-20133 Milan, Italy

Prof. Gonzalo Martinez-Barrera
Autonomous University
Toluca, Mexico

Prof. Domagoj Matesan
University of Split
Split 21000, Croatia

Prof. Mohamed Seddik Meddah
Kingston University
London KT1 2EE, UK
Prof. Euripidis Mistakidis
University of Thessaly
38334 Volos, Greece

Dr. A. Ramachandra Murthy
CSIR - Str. Eng. Research Centre
Chennai - 600113, India

Dr. Meysam Najimi
University of Nevada-Las Vegas
Las Vegas, NV 89154-4015, USA

Dr. Luca Nardini
University of Pisa
56126 Pisa, Italy

Dr. Tran Cao Thanh Ngoc
Vietnam National University
H Chí Minh, Vietnam

Prof. Vagelis G. Papadakis
University of Patras
30100 Agrinio, Greece

Prof. Gai-Fei Peng
Beijing Jiaotong University
Beijing100044, China

Prof. Victor Yepes Piqueras
University Politecnica de Valencia
s/n 46022 Valencia, Spain

Prof. Julio Pituba
University Federal de Goias
Cidade de Goiás - GO, Brazil

Prof. Hamid Reza Ronagh
University of Queensland
Brisbane, QLD 4027, Australia

Prof. Messaoud Saidani
Coventry University
Coventry CV1 5FB, UK

Prof. Mohamed Abd El Aziz Safan
Menoufia University
Menouf, Egypt

Dr. Velu Saraswathy
Central Electrochemical Res Ins
Karaikudi-630006, Tamilnadu, India

Dr. Raktipong Sahamitmongkol
Thammasat University
Bangkok 10200, Thailand

Prof. Konstantinos V. Spiliopoulos
National Tech. Univ. Athens
Zografou 157-80, Greece

Dr. Kai-Seung Ray Su
University of Hong Kong
Pokfulam, Hong Kong

Prof. Baris Sevim
Yildiz Tech. University
34220 Istanbul, Turekey

Prof. Halil Sezen
Ohio State University
Columbus, OH 43210-1173, USA

Dr. Faiz Uddin Ahmed Shaikh
Curtin University
Perth, WA 6845, Australia

Dr. Abid Ali Shah
University of Siegen
57072 Siegen, Germany

Prof. Piti Sukontasukkul
King Mongkut's Univ. of Tech. North Bangkok
Bangkok 10800, Thailand

Dr. K. Thangavel
Central Electrochemical Res. Ins.
Karaikudi 630 006, India

Prof. Catherina Thiele
Tech. Univ. Kaiserslautern
67653 Kaiserslautern,Germany

Prof. Gregor Trtnik
IGMAT Building Materials Ins.
1000 Ljubljana, Slovenia

Dr. Chih-Ta Tsai
National Cheng Kung University
70101 Tainan, Taipei, Taiwan

Prof. Xuan Hong Vu
Univeristy of Lyon1
69622 Villeurbanne cedex, France

Dr. Binsheng Zhang
Glasgow Caledonian University
Glasgow G4 0BA, Scotland, UK

Dr. Xiangming Zhou
Brunel University
Middlesex UB8 3PH, UK

Prof. Xiao-Hui Wang
Shangai Jiao Tong University
Shanghai 200240, China

Prof. Chung- Chia Yang
National Taiwan Ocean University
Keelung 20224, Taiwan




Instructions to Authors

1. Submission of the paper
Authors are asked to submit manuscripts in PDF format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.org/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[technop@chol.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers.
2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in three categories, i.e., 1) Regular technical paper, 2) Review papers and 3) Discussions. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 14-20 journal pages. There will be no page charges and no other fees unless the author wishes arrangements to provide an open access to his article. Authors are advised to read the details in the Appendix A for guide and Appendix B for a template of the instructions to authors for the format of the first page of the paper.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures are required at the end of the manuscript for reference in editing.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Appendix A of the instruction.
3. Review
All the submitted papers will undergo a peer-review process, and those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.
4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.
5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Transfer of Copyright Agreement may also be submitted.
6. Ethics
For the policies on the research and publication ethics not stated in this instructions, International standards for editors and authors (http://publicationethics.org/international-standards-editors-and-authors) can be applied.

*Appendix A. Authors' Guide
*Appendix B. Template
*Appendix C. Index
Table of Contents
       
 
  • 2014  Volume 2      No. 1      No.2    No.3
     
  • 2013  Volume 1      No. 1      No.2    No.3    No.4
           
    Subscription
    2014 Subscription Rates
    Volume 1 (4 issues)

    Advances in Concrete Construction

    Print +e

    Online +c

    Print & Online

     

    Personal

    Inst.

    Personal

    Inst.

    Personal

    Inst.

    Airmail*

     

    119

    315

    C

    C

    N

    N

    30


    < Price List of Techno-Press journals >


    C: Complimentary access N: Not available (N/A)
    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. PRINT & ONLINE: Subscribers have benefits of both subscription categories.

    *: The surface delivery is possible only to the countries listed below

    Argentina
    Australia
    Bangladesh
    Brazil
    Canada
    China
    Finland
    France
    Germany
    Hong Kong
    India
    Indonesia
    Ireland
    Japan
    Malaysia
    Mexico
    Netherlands

    New Zealand
    Norway
    Pakistan
    Peru
    Philippines
    Poland
    Russia
    Singapore

    South Africa
    Spain
    Sweden
    Taiwan
    Thailand
    UK
    USA
    Vietnam





    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2014 Techno Press
    P.O. Box 33, Yuseong, Daejeon 305-600 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: technop@chol.com