Techno Press
Tp_Editing System.E (TES.E)
Login Search
Techno-Press Journals



    Prof. Yong San Yoon
    Department of Mechanical Engineering
    Korea Advanced Institute of Science & Tech.
    Daejeon 305-701, South Korea
    Prof. Miguel Cerrolaza
    Int'l Center for Numerical Methods in Eng.
    Polytechnic University of Catalonia
    08034 Barcelona, Spain
    Prof. Sukyung Park
    Department of Mechanical Engineering
    KAIST, Science town
    Daejeon, 305-701, South Korea
Regional editors
    Prof. Taiji Adachi
    Dept. of Biomechanics
    Kyoto University
    Kyoto 606-8501, Japan
    Prof. Assad Oberai
    Dept. of Mech., Aerosp. & Nuclear Eng.
    Rensselaer Polytechnic Institute
    Troy, NY 12180, USA
    Prof. Manuel Doblaré
    Abengoa Research
    c/Energía Solar 1, Palmas Altas
    41014 Seville, Spain
Associate Editors
    Prof. Ernst Rank
    Faculty of Civil Engineering and Geodesy
    Technische Universität München
    Arcisstr. 21, 80290 Munich, Germany
    Prof. Anthony Petrella
    Dept. of Mech Eng.
    Colorado School of Mines
    Golden, Co 80401, USA

Managing Editor
    Prof. Chang-Koon Choi
    Korea Advanced Institute of Science & Technology
    Daejeon 305-701, Korea

ISSN:2287-2094(Print) ISSN:2287-2272(Online)

Vol. 2(4 issues) for 2015, Quarterly

Free Open Access journal: there is no charge for publishing open access.
Aims and Scope

The Advances in Biomechanics and Applications (ABA), An International Journal, reports the original contributions in applying biomechanics, biomaterials and biomedical principles to biological systems and biological phenomena. These areas are emerging and rapidly growing fields attracting more engineers and specialists in several branches. The journal aims at providing a forum of excellence, based on a widely disseminated publication, for all researchers interested in this interdisciplinary and promising area of engineering and applied sciences. The journal may cover;

- Biomechanics,
- Modeling/simulation/visualization,
- Medical applications,
- Biomedical engineering,
- Biomaterials,
- Medical devices,
- Living tissues/muscles/organs,
- Nerves,
- Fluid/blood dynamics,
- Bone/bone mechanics/ossification,
- Other relevant topics.
Editorial Board

Prof. A Al-Jumaily
Auckland Univ. of Technology
Auckland 92006, New Zealand

Prof. DAG Alvarado
National University of Colombia
Bogotá, Colombia

Prof. D. Ambrosi
Polytechnic of Milan
20133 Milan, Italy

Dr. Raghavendra Angara
Globus Medical Inc
Norristown, PA, USA

Prof. F. Auricchio
University of Pavia
27100 Pavia, Italy

Dr. W Bertucci
University of Reims
Reims 51100, France

Prof. B. Castañeda
Pontificial Catholic University
32 Lima, Perú

Prof. T. David
University of Canterbury
Christchurch, New Zealand

Prof. J. Di Paolo
National University of Entre Ríos
3100 Oro Verde, Argentina

Prof. Agnes Drochon
Universite de Technologie de ompiegne
60200 Compiegne, France

Prof. R Dumas
University Claude Bernard Lyon 1
Villeurbanne 69100, France

Dr. C Falcó
Catholic University of Valencia
Valencia 46003, Spain

Prof. P. Fernandes
echnical University of Lisbon
1049-001 Lisbon, Portugal

Dr. T Franz
University of Cape Town
Cape Town, South Africa

Dr. RECD Gabriel
Univ. of Trás-os-Montes & Alto Douro
Vila Real 5001-801, Portugal

Prof. C. Gasser
Royal Institute of Technology
SE-100 44 Stockholm, Sweden

Prof. M. Gee
Technische Universitat München
80333 München, Germany

Dr. A Gloria
National Research Council
Naples 80125, Italy

Prof. J. Goicolea
Polytechnic University of Madrid
28040 Madrid , Spain

Prof. P. Gomis
Polytechnic Univ. of Catalonia
08034 Barcelona, Spain

Dr. T. Guess
University of Missouri
Kansas City, MO 64110, USA

Prof. S. Gupta
Indian Institute of Technology
West Bengal 721302, India

Prof. M Martín-Landrove
Central University of Venezuela
Caracas, Código Post: 1050, Venezuela

Dr. KJ McQuade
University of Washington
Seattle, WA 98195-5502, USA

Prof. M Mesnard
Université de Bordeaux
33800, Bordeaux, France

Prof. Y Morsi
Swinburne Univ. of Technology
Hawthorn, Victoria 3122, Australia

Dr. S Müftü
Northeastern University
Boston, MA 02115, USA

Prof. R Natarajan
University of Illinois
Chicago, IL 60612, USA

Prof. N. Nuno
Ecole de Technologie Superieure
Montreal, Quebec, H3C 1K3 Canada

Dr. J Pauk
Bialystok Technical University
Bialystok 43201, Spain

Prof. SJ Pearson
University of Salford
Salford, M5 4WT, UK

Prof. D. Pioletti
Ecole Polytechnique Federal
1015 Lausanne, Switzerland

Prof. A Qiao
Beijing University of Technology
Beijing 100124, China

Prof. L Rakotomanana
Université de Rennes 1
35065 Rennes cedex, France

Dr. S Ramtani
University Inst of Tech (IUT)
Saint-Denis Cedex 93200, France

Prof. H. Rodrigues
Instituto Superior Tecnico
1049-001 Lisbon, Portugal

Prof. SMNA Senanayake
University of Brunei
BE1410, Brunei

Prof. S Shefelbine
Northeastern University
Boston, MA 02115, USA

Dr. FC Su
National Cheng Kung University
Tainan, Taiwan

Prof. Z Sun
Curtin University
Perth 6845, Australia

Prof. N Takano
Keio University
Yokohama, 223-8522 Kanagawa Japan

Prof. JMR Tavares
University of Porto
Oporto 4099, Portugal

Dr. R Tiossi
University of São Paulo
Ribeirão Preto 14040-904, Brazil

Prof. Ergin Tonuk
Universities District
06800 Cankaya, Ankara, Turkey

&Dr. W Kim
Technical University of Lisbon
Lisbon 1169, Portugal

Prof. YH Kim
Yonsei University
Wonju 220-710, South Korea

Dr. M Kopernik
AGH Univ of Sci and Tech
Krakow 30-059, Poland

Prof. E. Kuhl
Stanford University
Stanford, CA 94305,USA

Dr. T Lemaire
University of Paris
Paris 75005, France

Prof. Q. Li
University of Sidney
Sydney, N.S.W. 2006, Australia

Dr. T.C. Lim
SIM University
Singapore 599491

Dr. Haojie Mao
Wayne State University
Detroit, MI 48201, USA

Dr. G Vannozzi
University of Rome "Foro Italico"
Rome 00135, Italy

Prof. Y Ventikos
University of Oxford
Oxford, UK

Prof. S Wada
Osaka University
Toyonaka, Japan

Prof. JL Williams
University of Memphis
Memphis, TN 38152, USA

Dr. TCT Wu
Bridgewater State University
Bridgewater, MA 02325, USA

Prof. Z Yosibash
Ben-Gurion Univ. of the Negev Beer-Sheva

Dr. NN Zheng
Univ of N Carolina at Charlotte
Charlotte, NC 28223, USA

Dr. J Zhu
Northwest A&F University
Yangling, 712100, China

Prof. M.C. Ho-Ba-Tho
Université de Technologie
BP 20529-60205 Compiegne,France

Dr. O. Kayabasi
Gebze Institute of Technology
Gebze 41400, Turkey

Prof. H. van Lenthe
University of Leuven
Leuven, Belgium

Prof. B van Rietbergen
Technische Universiteit
Eindhoven, The Netherlands

Dr. R Hambli
University of Orléans
Orléans 45067, France

Dr. MR Torry
Illinois State University
Normal IL 61761, USA
Guide to Authors (Last updated: Oct 25, 2023)

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) ( Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors ( Violation of publication ethics will result in the activation of COPE flow chart. (
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. ( Authorship problems will be dealt with according to COPE flowcharts. (

7. Open Access
There is an option of publishing your paper as Open Access. When you receive a formal acceptance email, you will find a link that you may click on to pay the Article Processing Charge (APC) for Open Access publishing.

Table of Contents.
  • 2014  Volume 1      No. 1      No.2    No.3    No.4

    2016 Subscription Rates in US$ :

    Advances in Biomechanics and Application Volume 3 (4 issues)

    Print +e

    Online +c

    Print & Online

















    C: Complimentary access N: Not available (N/A)
    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. PRINT & ONLINE: Subscribers have benefits of both subscription categories.

    *: The surface delivery is possible only to the countries listed
    ** From 2018, all deliveries outside South Korea will be by airmail.

    Research and Publication Ethics

    All the editors, publishers, researchers, and peer reviewers of Techno-Press journals strongly encourage to carefully review and follow the Committee on Publication Ethics (COPE) guidelines:

    1. Authorship
    Authorship credit should be based on
        (1) Substantial contributors to the conception or design of the work or the acquisition, analysis
       or interpretation of data for the work,
        (2) Drafting the work or revising it critically for important intellectual content,
        (3) Final approval of the version to be published, and
        (4) Agreement to be accountable for all aspects of the work in ensuring that questions related
       to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
    Authors should meet these four conditions after the initial submission of a manuscript and any changes whatsoever in authorship (adding author(s), deleting author(s), or re-arranging the order of authors) must be explained by a letter to the editor from the authors concerned. This letter must be signed by all authors on the paper. Techno-Press does not correct authorship after the final acceptance unless a mistake has been made by the editorial staff. Authorship may be changed before the final acceptance when the authorship correction is requested by all of the authors involved with the manuscript. The corresponding author takes primary responsibility for communication with the journal during the manuscript submission, peer review, and publication process. The corresponding author should be available throughout the submission and peer review process to respond to editorial queries in a timely manner, and should be available to respond to critiques of the work and cooperate with any requests from the journal for data or additional information or questions about the paper even after publication.

    2. Originality, plagiarism and duplicate publication
    Submitted manuscripts must not have been previously published or be under consideration for publication elsewhere. No part of the accepted manuscript should be duplicated in any other journal without the permission of the Editorial Board. Submitted manuscripts are checked for possible plagiarism or duplicate publication upon the papers arrival. If plagiarism or duplicate publication is detected, the manuscripts may be rejected, the authors will be announced in the journal, and their institutions will be informed. There will also be penalties for the authors. A letter of permission is required for any and all material that has been published previously. It is the responsibility of the author to request permission from the publisher for any material that is being reproduced. This requirement applies to text, figures, and tables.

    3. Conflict of interest statement
    The corresponding author must inform the editor of any potential conflicts of interest that could influence the authors interpretation of the data. Examples of potential conflicts of interest are financial support from or connections to companies, political pressure from interest groups, and academically related issues. In particular, all sources of funding applicable to the study should be explicitly stated.

    4. Process for managing research and publication misconduct
    When the journal faces suspected cases of research and publication misconduct, such as redundant publication, plagiarism, fraudulent or fabricated data, changes in authorship, undisclosed conflict of interest, ethical problems with a submitted manuscript, appropriation by a reviewer of an authors idea or data, and complaints against editors, the resolution process will follow the flowchart provided by COPE,
    The discussion and decision on the suspected cases are carried out by the Editorial Board.

    5. Editorial responsibilities
    The Editorial Board will continuously work to monitor and safeguard publication ethics:
    * Guidelines for retracting articles;
    * Maintenance of the integrity of academic records;
    * Preclusion of business needs from compromising intellectual and ethical standards;
    * Publishing corrections, clarifications, retractions, and apologies when needed; and
    * Excluding plagiarized and fraudulent data.
    The editors maintain the following responsibilities:
    * Responsibility and authority to reject and accept articles;
    * Avoid any conflict of interest with respect to articles they reject or accept;
    * Promote the publication of corrections or retractions when errors are found; and
    * Preserve the anonymity of reviewers.

    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2024 Techno-Press ALL RIGHTS RESERVED.
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Email: