Techno Press
Tp_Editing System.E (TES.E)
Login Search



Home

Editors-in-Chief
    Prof. Philippe Miele
    Ecole Nationale Superieure de Chimie
    de Montpellier & IUF, 34296 Montpellier, France

    Prof. Francisco Marquez Linares
    School of Science and Technology
    University of Turabo
    Gurabo 00725, Puerto Rico

    Prof. Nasr Bensalah
    Department of Chemistry & Earth Science
    College of Arts & Science, Qatar Universtiy
    2713 Doha, State of Qatar

    Prof. Chang-Koon Choi
    Korea Advanced Institute of Science & Technology
    Daejeon 305-701, Korea

ISSN:2287-6316(Print) ISSN:2287-6324(Online)

Vol 5(4 issues) for 2017, Quarterly
Aims and Scope

The "Advances in Energy Research (ERi), An International Journal", aims at the valuable source of information and excellent publication channel for the international scientific community of energy research. The areas covered by the journal are research on;

- Energy and power production, distribution, and usage,
- Sustainable energy infrastructures and system reliability,
- Conventional energy and fuel sources,
- Renewable energy,
- Alternative energy (nuclear power, solar energy, hydrogen production, etc.),
- Electrochemical energy storage systems (batteries, fuel cells, capacitors, etc.),
- Energy efficiency and conservation,
- Energy policy and management,
- Energy and environment issues, and
- Other energy related topics.

Editorial Board
Dr. Ambali Saka Abdulkareem
Federal U of Tech, Minna
Niger State, Nigeria


Prof. L. Acosta-Michlik
Potsdam Inst. Climate Impact Res.
14412 Potsdam, Germany


Prof. S.I. Allakhverdiev
Inst. Plant Physiology, Rus. Academy of Sci.
Moscow 127276, Russia


Prof. R. Anand
Nat Inst of Tech
India


Prof. C. Arbizzani
Bologna University
Bologna 40126, Italy


Prof. Morteza M. Ardehali
Amirkabir U Tech
Iran


Dr. L. Aye
The University of Melbourne
Melbourne, Australia


Prof. N. Badi
University of Houston
Houston, TX 77004, USA


Prof. P.N. Botsaris
Democritus University of Thrace
69100 Komotini, Greece


Prof. Atila Caglar
Kastamonu U
Turkey


Prof. R. Carriveau
University of Windsor
Ontario N9B 3P4, Canada


Dr. A.M. Chaparro
CIEMAT
28040 Madrid, Spain


Dr. K.H. Chen
National Taiwan University
Taipei City10617, Taiwan


Prof. Q. Chen
Tsinghua University
Haidian 100084, China


Dr. Ken Chiang
RMIT University
Melbourne VIC 3001, Australia


Prof. Y. Demirel
University of Nebraska Lincoln
Lincoln, NE 68508, USA


Prof. A. Salah Elahi
Islamic Azad University (IAU)
Tehran, Iran


Prof. Mohamed Gadi
U Nottingham
Nottingham, NG7 2RD, UK


Dr. Fausto Garcia
U Castilla-La Mancha
Spain


Prof. M. Zucchetti
Polytec. Univ. of Eng. in Torino
Turin 10129, Italy


Prof. Frederic Kuznik
Nat Inst Appl Sic
France


Dr. Jian V. Li
Texas State U
USA


Dr. Brantley T. Liddle
Asia Pacific Energy Res Centre
Japan


Prof. F. Liu
Univ. of Texas at Arlington
TX 76019, USA


Prof. L. Lombardi
Niccolo Cusano University
Rome, Italy


Prof. L. Luo
Nat'l Center for Sci. Res. (CNRS)
50609, France


Prof. M. McAleer
Erasmus Univ. of Rotterdam
Rotterdam 3000, Netherlands


Prof. S.V. Mohan
Indian Inst. Chemical Tech.
Hyderabad 500607, India


Dr. M. Abdul Mujeebu
University of Dammam
Al-Dammam, Kingdom of Saudi Arabia


Prof. M. Ni
The Hong Kong Polytechnic Univ.
Kowloon, Hong Kong


Prof. S. Okamoto
Shimane University
Matsue 690-8504, Japan


Dr. Annarita Paiano
Aldo Moro U of Bari
Italy


Prof. Zhejun Pan
CSIRO Earth Sci & Resour Eng
Clayton South, VIC 3169, Australia




 
Prof. D. Popescu
Gheorghe Asachi Tech. U. Iasi
700050 Iasi, Romania


Dr. N. Rajalakshmi
Cntr. for Fuel Cell Tech., IIT Madras Res. Park
Chennai 600 113, India


Prof. J. Ran
Chongqing University
Chongqing 400044, China


Prof. J.F. Gomes
Lisbon Superior Eng. Inst.
Lisbon 1959-007, Portugal


Dr. Y. Himri
Elec. & Gas Nat ENT (Sonelgaz)
Oran 31000, Algeri


Prof. A.R.K. Ismail
University of Campinas
Campinas 13083-970, Brazil


Prof. A.M.H. Kandil
Taif University
Taif 21974, Saudi Arabia


Prof. E. Karatepe
Ege University
Bornova 35040, Turkey


Prof. A. Kassem
Sohag University
Governorate, Egypt


Dr. S.H. Rhee
Seoul Nat'l University
Seoul 151-742, Korea


Dr. S. K. Tyagi
SSS-Nat Inst of Renew Energy
India


Prof. F. Wen
Zhejiang University
Hangzhou 310027, China


Prof. Dongfang Yang
Lakehead U
Canada


Prof. Paolo Zagaglia
U Bologna
Italy




 
Guide to Authors

1. Submission of the paper
Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[eri@techno-press.com]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers.

2. Preparation of the manuscript
General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 14-20 journal pages. There will be no page charges and no other fees unless the author wishes arrangements to provide an open access to his article. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures are required at the end of the manuscript for reference in editing.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide of the instruction.

3. Review
All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs
Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright
Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics
Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (http://publicationethics.org/international-standards-editors-and-authors). Violation of publication ethics will result in the activation of COPE flow chart. (http://home.jeet.or.kr/Flowcharts.pdf)

7. Publication Fee
Except for open access articles, there is no page charge or article processing fee for submission and publication in this journal.

Table of Contents
       
 
  • 2016  Volume 4      No. 1      No.2    No.3    No.4    No.4
     
  • 2015  Volume 3      No. 1      No.2    No.3    No.4
     
  • 2014  Volume 2      No. 1      No.2
     
  • 2013  Volume 1      No. 1      No.2
           
    Subscription

    2017 Subscription Rates in US$ :

    Advances in Energy Research Volume 5 (4 issues)
     

    Print +e

    Online +c

    Print & Online

     

    Personal

    Inst.

    Personal

    Inst.

    Personal

    Inst.

    Airmail*

     

    120

    321

    C

    C

    N

    N

    32


    C: Complimentary access N: Not available (N/A)
    Orders are accepted by calendar year only.

    1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
    2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
    3. PRINT & ONLINE: Subscribers have benefits of both subscription categories.

    *: The surface delivery is possible only to the countries listed
    [Countries]





    Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2017 Techno-Press
    P.O. Box 33, Yuseong, Daejeon 34186 Korea, Tel: +82-42-828-7996, Fax : +82-42-828-7997, Email: info@techno-press.com